Toe

1. Start the engine and center the steering wheel and lock into place.
2. Turn the engine OFF, and hold the steering wheel in the "straight forward" position by attaching a rigid link form the steering wheel to the seat.
3. Check the toe settings; follow the equipment manufacturer's instructions.





4. Remove the clamps.

NOTE: Do not allow the steering gear bellows to twist when the front wheel spindle tie rod is rotated.





5. Loosen the nuts.
- Clean and lubricate the nuts and front wheel spindle tie rod threads.





6. Rotate the front wheel spindle tie rods.





7. Tighten the nuts.





8. Install the clamps
9. Recheck the toe settings; follow the equipment manufacturer's instructions.