Air Bag Control Module: Service and Repair

REMOVAL

WARNING: TO AVOID ACCIDENTAL DEPLOYMENT AND POSSIBLE PERSONAL INJURY, THE BACKUP POWER SUPPLY MUST BE DEPLETED BEFORE REPAIRING OR REPLACING ANY AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) COMPONENTS. TO DEPLETE THE BACKUP POWER SUPPLY ENERGY, DISCONNECT THE BATTERY GROUND CABLE AND WAIT ONE MINUTE. BE SURE TO DISCONNECT AUXILIARY BATTERIES AND POWER SUPPLIES (IF SO EQUIPPED)

CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage can result.

1. Disconnect the battery ground cable.
2. Remove the message center.
3. Remove the radio.




4. Remove the air bag diagnostic monitor.
1. Remove the screws.
2. Disconnect the electrical connectors.
3. Remove the air bag diagnostic monitor.

INSTALLATION




1. Follow the removal procedure in reverse order.