Camshaft, Engine

GENERAL SPECIFICATIONS
Lobe Lift
Intake (Primary) 5.57472 mm (0.219466 inch)
Intake (Secondary) 5.55672 mm (0.218768 inch)
Exhaust 5.55152 mm (0.218563 inch)
Allowable Lobe Lift Loss
Theoretical Valve Lift @ Zero Lash
Intake (Primary) 10.0 mm (0.3937 inch)
Intake (Secondary) 10.0 mm (0.3937 inch)
Exhaust 10.0 mm (0.3937 inch)
End Play 0.025-0.165 mm (0.00098-0.00649 inch)
Service Limit 0.190 mm (0.007480 inch)
Journal to Bearing Clearance 0.025-0.076 mm (0.00098-0.002992 inch)
Service Limit 0.100 mm (0.003937 inch) MAX
Journal Diameter (ALL) 26.962-26.936 mm (1.0615-1.0605 inch)
Bearing Inside Diameter (ALL) 27.012-26.987 mm (1.0635-1.0625 inch)
Front Bearing Location a

a Distance front edge of bearing is installed below front face of cylinder block.