Front

REMOVAL
1. Raise the vehicle on a hoist.
2. Remove the wheel and tire assembly.
3. Remove the front disc brake caliper and the anchor plate, the disc brake rotor and the disc brake rotor shield. Support the disc brake caliper with wire.

NOTE: Mark the front disc brake rotor and the lug bolt so the front disc brake rotor can be installed in the same position.





4. Remove the wheel hub.
- Remove and discard the front hub cap grease seal
- Remove and discard the front axle wheel hub retainer.





5. Remove the wheel hub.

INSTALLATION





1. Follow the removal procedure in reverse order.