Inside Rear View Mirror

Installer, Rear View Mirror:

SPECIAL SERVICE TOOL(S)

REMOVAL







1. Disconnect the compass module connector and remove the compass module.

CAUTION: The inside rear view mirror is of the breakaway design. Excessive force in any direction will cause damage to the inside rear view mirror.







2. Remove the inside rear view mirror.
1 Disconnect the inside rear view mirror connector.
2 Insert a small flat-blade screwdriver into the slot at the base of the inside rear view mirror. Hold the inside rear view mirror and pull the screwdriver rearward until the inside rear view mirror snaps off the inside rear view mirror bracket.

INSTALLATION







1. Install the inside rear view mirror.
1 Slide the inside rear view mirror onto the inside rear view mirror bracket. Use the Rear View Mirror Replacer to complete the installation.
^ Connect the inside rear view mirror connector.
2. Connect the compass connector and snap the compass module onto the inside rear view mirror.