Forward

REMOVAL
1. Remove the A/C condenser core. For additional information, refer to Condenser Core.







2. Remove the forward condenser to evaporator tube from the A/C condenser core.

INSTALLATION
1. To install, reverse the removal procedure.
- Lubricate the refrigerant system with the correct amount of PAG compressor Oil, YN-12c, F7AZ-19589-DA or equivalent meeting Ford specification WSH-M1C231-B. Refrigerant Oil Addition
- Lubricate the O-ring seal with PAG compressor oil, YN-12c, F7AZ-19589-DA or equivalent meeting Ford specification WSH-M1C231-B.