Sunroof / Moonroof: Service and Repair

REMOVAL
1. Operate the roof opening glass assembly to the closed position.







2. Remove the roof opening glass assembly.
1 Swing the left and right sight shields rearward.
2 Remove the four screws.
3 From the exterior of the vehicle, lift the roof opening glass assembly from the vehicle.

3. Remove the roof opening glass seal.

INSTALLATION







1. Install the roof opening glass seal.
^ Position the roof opening glass seal seam in the center of the passenger side of the roof opening glass.







2. Install the roof opening glass assembly.
1 Install the roof opening glass assembly in place aligning screw holes.
2 Install the four screws.
3 Swing the left and right sight shields forward and snap into place.

NOTE: Make sure to carefully align the sight shield to the snap retainer prior to positioning into place.

3. Adjust the roof opening glass height. For additional information, refer to Height Adjustment.