Muffler: Service and Repair

Removal and Installation
1. Raise and support the vehicle.





2. Support the exhaust pipes at the rear of the resonators.





3. Note: The exhaust hanger bracket insulators can be reused if they show no signs of damage. Lubricate before removal with Silicone Lubricant F5AZ-19553-AA meeting Ford specification ESR-M13P4-A or equivalent.

Remove the exhaust hanger insulators.





4. Remove the nuts.





5. Remove the bolts, the brace and the mufflers.
6. To install, reverse the removal procedure.