Headlamp: Adjustments

1. Before starting the headlamp adjustment, check for:
^ correct tire inflation
^ no other load is in the vehicle other than a half tank of gas
^ headlamps are clean
^ headlamps are operating correctly
^ vehicle is on level ground







2. Remove the radiator upper sight shield.
1 Remove the pin-type retainers.
2 Remove the radiator upper sight shield.







3. Aim the headlamps.
1 Using a 4mm socket, turn the adjuster right or left to move the headlamp up or down.
2 Using a 4mm socket, turn the adjuster right or left to move the headlamp from side to side.

NOTE: LH side shown, RH side similar.