Rear Door Window Glass: Service and Repair

REMOVAL
1. Remove the rear door trim panel.






2. Remove the interior garnish molding.







3. Remove the interior weather strip.







4. Lower the rear door window glass until the glass spacer bracket is visible in the access hole.







5. Remove the rear door window glass spacer bracket.
1 Using a punch, remove the center portion of the spacer bracket.
2 Remove the outer portion of the spacer bracket.







6. Remove the exterior weatherstrip.







7. Remove the rear door window glass.
^ Lift the rear door window glass out of the window regulator.
^ Lower the rear door window glass out of the channel.
^ Lift the rear door window glass through the belt opening to the outside of the channel.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE: Prior to the installation of the window, reinstall the outer and center portion of the spacer bracket into the rear door window glass. The spacer bracket should protrude equal distances on both sides of the window glass.