Radio, Stereo, and Compact Disc: Service and Repair

REMOVAL
1. Disconnect the battery ground cable. Refer to Battery.
2. Remove the center A/C register finish panel. For additional information, refer to Heating and Air Conditioning.







3. Remove the ashtray finish panel.
^ Disconnect the electrical connectors.







4. Position the audio/DATC assembly.
1. Remove the bolts.
2. Position the audio unit.







5. Remove the audio/DATC assembly.
1. Disconnect the DATC electrical connectors.
2. Disconnect the antenna lead-in cable.
3. Disconnect the audio unit electrical connectors.
4. Remove the audio unit.







6. Separate the audio unit from the audio/DATC assembly.
1. Remove the six screws.
2. Separate the audio unit.

INSTALLATION
1. To install, reverse the removal procedure.