Front Fender: Service and Repair

FENDER

Removal and Installation

LH or RH Side
1. Remove the front bumper cover.
2. Remove the wheel and tire assembly.
3. Remove the front and rear inner splash shield.

LH Side Only







4. Position the speed control module aside.
- Loosen the top bolt.
- Remove the bottom bolt.

LH or RH Side
5. Remove the fender stuffer.







6. Remove the inner front fender bolts.







7. Remove the two front two-part pin-type retainers and position the front rocker moulding aside.







8. Remove the lower front fender bolts.







9. Remove the radiator upper sight shield.
1 Remove the retainers.
2 Remove the radiator upper sight shield.







10. Remove the headlamp assembly.
1 Remove the three bolts.
2 Remove the headlamp assembly.
- Disconnect the electrical connector.







11. Remove the radiator grille opening panel to front fender bolts.

LH Side Only
12. Position the splash shield aside.

LH or RH Side







13. Disengage the wiring harness locator.







14. NOTE: Support the hood using a prop rod.

Disengage the lower hood assist strut.







15. Remove the front fender bolts and the hood assist strut ball stud.
16. Remove the front fender.
17. To install, reverse the removal procedure.