Height Adjustment

1. Operate the roof opening glass assembly to the closed position.







2. Swing the left sight shield and right sight shield rearward and loosen the screws on each side.







3. Adjust the front glass edge to between flush and 1.7-2.7 mm (0.07-0.11 in) low.







4. Adjust the rear glass edge to between flush and 0.7-1.7 mm (0.02-0.07 in) low.







5. Tighten the four screws and swing the left and right sight shields forward and snap into place.

NOTE: Make sure to carefully align the sight shield to the snap retainer prior to positioning into place.