Air Conditioning System Flushing

SPECIAL SERVICE TOOLS

WARNING: This equipment is designed to be used only with the A/C System Flushing Solvent U4AZ-19579-A. Use of other solvents can result in personal injury or damage to the vehicle and the flusher.

CAUTION:
- Do not let the flushing solvent come in contact with your eyes or skin. If eye contamination occurs, flush eyes with water for 15 to 20 minutes. Remove contaminated clothing, and wash affected skin with soap and water. Seek medical attention.
- The 3.78 liters (1 gallon) of solvent and the filter used in this flusher are intended for use on ONE vehicle only. They may be used to flush both the A/C evaporator core and the A/C condenser core on an individual vehicle, but under no circumstances are they to be used on more than one vehicle. Residual contamination can contaminate other vehicles, causing possible damage to the A/C system components.

1. Follow the instructions included with the A/C flusher kit to flush both the A/C evaporator core and the A/C condenser core.

NOTE: System flushing must be carried out prior to the installation of the new A/C compressor. Flush only the A/C evaporator core and A/C condenser core. Do not flush the receiver/drier, thermostatic expansion valve, hoses and mufflers. Hoses can be reused unless they contain foreign materials.

2. Dispose of the drained flushing solvent and filter according to federal, state and local regulations.