Cluster Finish Panel

REMOVAL
1. Adjust the steering column to the full tilt down and full extended position.
2. Disconnect the battery ground cable. For additional information, refer to Battery.







3. Remove the instrument panel steering column cover.
1. Remove the screws.
2 Remove the instrument panel steering column cover.
- Disconnect the electrical connectors.







4. Remove the outer instrument panel finish panel.
- Disconnect the electrical connectors.







5. Remove the inner instrument panel finish panel.







6. Position the instrument panel cluster finish panel aside.
1 Remove the screws.
2 Remove the instrument panel cluster finish panel.







7. Disconnect the in-car air temperature sensor and remove the instrument panel cluster finish panel.

INSTALLATION
1. To install, reverse the removal procedure.