Fog/Driving Lamp: Service and Repair

REMOVAL
1. Raise and support the vehicle. For additional information, refer to Maintenance/Service and Repair.

WARNING: THE HALOGEN FOG LAMP BULB CONTAINS GAS UNDER PRESSURE. THE BULB MAY SHATTER IF THE GLASS ENVELOPE IS SCRATCHED OR IF THE BULB IS DROPPED. HANDLE THE BULB ONLY BY ITS BASE. AVOID TOUCHING THE GLASS ENVELOPE.







2. Remove the fog lamp assembly.
1 Disconnect the electrical connector.
2 Remove the nuts.
3 Remove the fog lamp assembly.
^ If necessary, install a new bulb.

INSTALLATION
1. To install, reverse the removal procedure.