Headlamp Bulb: Service and Repair

REMOVAL







1. Remove the radiator upper sight shield.
1. Remove the pin-type retainers.
2. Remove the radiator upper sight shield.

WARNING: THE HALOGEN BULB CONTAINS GAS UNDER PRESSURE. THE BULB MAY SHATTER IF THE GLASS ENVELOPE IS SCRATCHED OR IF THE BULB IS DROPPED. HANDLE THE BULB ONLY BY ITS BASE. AVOID TOUCHING THE GLASS ENVELOPE.

NOTE: The headlamp bulb should not be removed from the headlamp assembly until just before a replacement bulb is installed. Removing the bulb for an extended period of time may affect headlamp bulb performance. Contaminants may enter the headlamp assembly where they can settle on the lens and reflector. Never turn on the headlamps with the bulb removed.







2. Remove the headlamp bulb.
1. Disconnect the electrical connector.
2. Remove the headlamp bulb.

NOTE: Remove both the high and low beam headlamp bulbs in the same Way.

INSTALLATION
1. To install, reverse the removal procedure.