Horn Switch: Service and Repair

REMOVAL
1. Remove the driver side air bag module. Refer to Air Bag Systems.







2. Remove the horn switch pad.
1 Remove the bolts.
2 Remove the horn switch pad.

NOTE: The four horn switch springs are not attached. To avoid losing the springs use caution when removing the horn switch.







3. Remove the horn switch.
1 Remove the springs.
2 Disconnect the steering wheel controls.
3 Remove the horn switch.


INSTALLATION
1. To install, reverse the removal procedure.

NOTE: To provide correct tension between the horn pad and horn switch, install the yellow horn switch springs at the bottom and the silver horn switch springs at the top.