Attachment III - Technical Information

NOTE:
SOME VEHICLES MAY HAVE HAD THE PCM REPROGRAMMED PREVIOUSLY. ON THESE VEHICLES, VERIFY CALIBRATION USING APPROPRIATE DIAGNOSTIC TOOL.

SERVICE PROCEDURE





PMC Reprogramming Information

1. Reprogram the Powertrain Control Module (PCM) to the latest calibration listed below (only one of these calibrations will be selectable for each vehicle), using one of the following two (2) methods:

^ Worldwide Diagnostic system (WDS). Use B7 CD-ROM or later.

^ Service Bay Technical System (SBTS) and the New Generation STAR (NGS) Tester with Rotunda flash cable (007-00531) and Rotunda flash card (007-00532). Use R00 Calibration CD-ROM dated May, 2000 or later.





2. Obtain and prepare the Authorized Modifications Label. Write the modification completed, your P & A Code, date of repair and the program type and program number as shown.

3. Apply label to clear area of the upper radiator support.