Lateral Accelerometer: Service and Repair

Removal

Note: The stability assist module needs to be recalibrated whenever a component is disconnected, moved, or a new component is installed. For additional information regarding the recalibration procedure and when the recalibration procedure should be carried out, refer to Antilock Brakes / Traction Control Systems; Testing and Inspection.


1. Remove the floor console.





2. Remove the console A/C duct.





3. Disconnect the lateral accelerometer electrical connector.





4. Remove the lateral accelerometer.
1 Remove the lateral accelerometer bolts.
2 Remove the lateral accelerometer.

Installation

Note: The stability assist module needs to be recalibrated whenever a component is disconnected, moved, or a new component is installed. For additional information regarding the recalibration procedure and when the recalibration procedure should be carried out, refer to Antilock Brakes / Traction Control Systems; Testing and Inspection.


Note: The accelerometer is positioned with the connector pointed to the left side of the vehicle. Be sure to mount the accelerometer in this orientation during the installation procedure.





1. To install, reverse the removal procedure.