Ignition Switch Lock Cylinder: Service and Repair

Removal
1. Disconnect the battery ground cable and wait at least one minute.





2. Remove the bolts. Detach the steering column opening cover.





3. Disconnect the electrical connector. Remove the steering column opening cover.





4. Remove the bolts and the hood release handle assembly.





5. Remove the bolt and the heater duct.





6. Remove the bolts and the steering column opening cover reinforcement.





7. Turn the ignition switch to the RUN position.








8. Using a small flat-blade screwdriver, depress the ignition switch lock cylinder tab. Remove the ignition switch lock cylinder.

Installation
1. To install, reverse the removal procedure.
- Verify correct operation of the ignition switch lock cylinder.