Overdrive Planetary and One-Way Clutch Assembly

Disassembly

1. Note: The overdrive one-way clutch is serviced with the center shaft assembly.





Remove the center shaft from the overdrive ring gear.
1 Remove the overdrive center shaft retaining ring.
2 While rotating counterclockwise remove the center shaft from the ring gear.

2. CAUTION: Do not remove the overdrive one way clutch. Damage to the clutch may occur if it is removed.





Clean and inspect the overdrive one-way clutch and center shaft.
- Inspect for cracks in the roller cage and wear on the roller clutch, and the press fit of the one-way clutch to the center shaft.





3. Inspect the one-way clutch.
- Temporarily insert the overdrive planetary gear carrier assembly into the one-way clutch rollers for verification of the one-way clutch.
- The planetary gear must rotate counterclockwise and hold when rotated clockwise.
- Remove the planetary gear carrier assembly.

Assembly

1. Install the center shaft and one-way clutch.





1 Install the center shaft and one-way clutch.
2 Install the center shaft retaining ring.