Vehicle Damage Warnings

CAUTION:
^ Do not scratch the pinch weld.
^ Care must be taken to avoid scratching the pinch weld.
^ After installing the new urethane-installed glass, the vehicle should not be driven until the Urethane Sealant has cured. The curing time at temperatures above 13°C (55°F) and relative humidity above 50% is 12-24 hours (decreasing at higher temperatures and lower humidities). Inadequate curing of the Urethane Sealant may adversely affect the strength of the Urethane Sealant bond.
^ Wipe off the urethane glass prep Immediately after each application because it flash dries. Apply deliberate strokes, making sure not to overlap the applied area
^ If the vehicle is to be driven within 24 hours of urethane sealant application, Urethane Sealant Essex U-216 meeting Ford specification WSB-M2G316-B must be used due to its one-hour cure time.
^ Open the windows to prevent the back window glass from being pushed out by air pressure if a door is closed.
^ Make sure the front door window glass correctly seats in the glass mounting brackets as the front door window glass is raised.