Portable Support Electronics (PSE) Module

REMOVAL

CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.







1. Disconnect the battery ground cable.
2. Remove the rear seat back; refer to Seats.







3. Remove the luggage compartment front cover.
1 Remove the pushpins.
2 Remove the luggage compartment front cover.







4. Remove the portable support electronics module.
1 Disconnect the electrical connectors.
2 Remove the screws.
3 Remove the portable support electronics module.

INSTALLATION







1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.