Speaker Walk-Around Test

NOTE: To enter the Speaker Walk-Around Test or Audio Control Module (ACM) self-diagnostic mode, the audio unit must be turned on and in radio tuner mode (AM/FM).

1. To enter the Speaker Walk-Around Test, simultaneously press ACM Preset Buttons 3 and 6.
2. The Speaker Walk-Around Test stops at each speaker and applies sound to each speaker for about one to two seconds. Each speaker is tested and displayed on the ACM in the following sequence: RF, LF, LR, RR.
3. The speaker walk-around test automatically continues and tests Subwoofer I and Subwoofer II for speaker short and CD/DJ (P100i only). If a speaker short exists, SPKR SHORT will be displayed. If the vehicle is not equipped with CD/DJ or if the CD/DJ is not responding, NO DJ (P100i only) will be displayed.