Sunroof / Moonroof: Adjustments

1. Swing the LH and the RH sight shields rearward.







2. Loosen the LH and RH screws.







3. Adjust the front glass edge to between flush and 1.00 mm (0.04 inch) low.







4. Adjust the rear glass edge to between flush and 1.00 mm (0.04 inch) high.







5. Tighten the LH and the RH screws.







6. Install the LH and the RH sight shields.

NOTE: Make sure to carefully align the sight shield to the snap retainer prior to positioning into place.