Compressor to Condenser Discharge Line

REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Perform the Refrigerant Discharging and Recovery Procedure.







3. Disconnect the A/C pressure cut-off switch wire harness connector.







4. Remove the A/C pressure cut-off switch.







5. Remove the A/C compressor to condenser discharge line nut.







6. Disconnect the A/C compressor to condenser discharge line from the A/C manifold and tube. Refer to spring lock couplings disconnect and connect procedure. Spring Lock Coupling Connect and Disconnect Procedure







7. Disconnect the A/C compressor to condenser discharge line from the A/C condenser core and remove the A/C compressor to condenser discharge line.

INSTALLATION

















1. To install, reverse the removal procedure.
- Lubricate the O-ring seal with PAG compressor oil YN-12-C F7AZ-19589-DA or equivalent meeting Ford specification WSH-M1C231-B.