Evaporator to Compressor Suction Line

REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Perform the Refrigerant Discharging and Recovery Procedure.







3. Disconnect the A/C cycling switch wire harness connector.







4. Remove the A/C cycling switch.







5. Disconnect the evaporator to compressor suction line from the suction accumulator/drier. Refer to spring lock couplings disconnect and connect procedure.







6. Disconnect and remove the evaporator to compressor suction line from the A/C manifold and tube assembly. Refer to spring lock couplings disconnect and connect procedure.

INSTALLATION
1. To install, reverse the removal procedure.
- Lubricate the O-ring seal with PAG compressor oil YN-12-C F7AZ-19589-DA or equivalent meeting Ford specification WSH-M1C231-B.