Test Y: LFC 36/DTC B1995 - Driver Side Air Bag CKT Resistance Low

Y1:

Y2:

Y3 - Y4:

Y5:

Y6 - Y8:

Normal Operation
The Restraints Control Module (RCM) monitors the resistance of the driver side air bag circuit loop and the air bag module igniter at RCM C1 pin 2 and 3. If the resistance is less than 1.4 ohms, the RCM will store Diagnostic Trouble Code (DTC) B1995 and flash Lamp Fault Code (LFC) 36.

Possible Causes
A low resistance on the driver side air bag circuit could be caused by:
^ damaged wiring on circuit 1257 (WH/LB).
^ damaged wiring on circuit 1258 (BN/LB).
^ damaged driver side air bag module.