Transmission Position Sensor/Switch: Service and Repair

Special Tools:

1. Disconnect the battery ground cable.
2. Raise the vehicle on a hoist.





3. Disconnect the manual lever shift control cable.





4. Loosen the digital TR bolts.





5. Note: Manual shift lever shaft must be in the neutral position.

Using the TRS Alignment Tool, align the digital TR sensor slots. The tool is designed to fit snugly.





6. Tighten the bolts.





7. With the manual lever in overdrive, connect the shift lever control cable.
8. Install the digital TR sensor electrical connector.
9. Lower the vehicle.
10. Connect the battery ground cable.