Steering Gear: Specifications
| Hose Fittings At Gear | 12 - 18 Foot Pound-Force (ft.lb) |
| Steering Gear Race Setscrews | 15 - 24.9 Inch Pound-Force (in.lb) |
| Steering Gear Bolts | 51 - 67 Foot Pound-Force (ft.lb) |
| Fittings at Steering Gear | 12 - 18 Foot Pound-Force (ft.lb) |
| Steering Gear Sector Shaft Arm to Sector Shaft Retaining Nut and Lockwasher | 200 - 250 Foot Pound-Force (ft.lb) |
| Steering Gear Sector Shaft Arm to Sector Shaft Arm Drag Link Nut | 52 - 59 Foot Pound-Force (ft.lb) |
| Ratio | 14:1 |
| Static Steering Wheel Turning Effort | 18 Inch Pound-Force (in.lb) |
| Total Meshload Over Worm Bearing Preload Over Ends | 4-9 Inch Pound-Force (in.lb) |
| Turning Effort | 6.0 lbs. |
| Turns of Steering Wheel Lock to Lock-Linkage Disconnected | 3.4 Count (ct) |
| Type | Recirculating Ball Torsion Bar |
| Worm Bearing Preload Max. | 8 Inch Pound-Force (in.lb) |
| Steering Gear Meshload | 12 - 16 Inch lbs. |
| Ball Guide Clamp Bolts | 45-62 Inch Pound-Force (in.lb) |
| Mesh Load Adjuster Lock Nut | 19-26 Foot Pound-Force (ft.lb) |
| Power Steering Gear Race Nut | 55-90 Foot Pound-Force (ft.lb) |