Brake Disc Shield
Removal1. Remove the brake disc.
2. CAUTION: Use a 5.5 mm (0.22 inch) drill. DO NOT exceed past a 6 mm (0.24 inch) drill.
Drill out the shield rivets.
Installation
1. To install, reverse the removal procedure.
1. Remove the brake disc.
2. CAUTION: Use a 5.5 mm (0.22 inch) drill. DO NOT exceed past a 6 mm (0.24 inch) drill.
Drill out the shield rivets.
Installation
1. To install, reverse the removal procedure.