Test J

PINPOINT TEST J: THE DOORS DO NOT LOCK/UNLOCK USING THE KEYLESS ENTRY KEYPAD

Test J1-J4:

Test J4-J5:

Test J6-J8:

Test J8-J10:

Normal Operation
When a button is pressed on the keyless entry keypad, a signal is sent to the driver door module (DDM) to activate the function requested. A code is entered to unlock the driver door. A code plus 3/4 button will unlock all doors. Pressing 7/8 plus 9/0 will lock all doors.

Customer code 1 used to unlock door will recall memory Position 1. Customer Code 2 used to unlock door will recall memory Position 2.

Possible Causes
- B1526 keyless entry circuit short to ground
- circuit 7-AA70 (YE/GN) shorted to ground or open
- circuit 8-AA70 (WH/GN) shorted to ground or open
- circuit 9-AA70 (BN/GN) open
- circuit 10-AA70 (GY/OG) shorted to ground or open
- keyless entry keypad
- DDM