Air Duct: Service and Repair

AIR DISTRIBUTION DUCTS

REMOVAL
1. If removing the front floor ducts, remove the instrument panel lower insulators.
2. If removing the rear seat floor ducts, remove the front seats.
3. If removing the rear seat floor ducts, remove the lower cowl trim panels and front door sill plates to position the carpet away from the ducts.
4. If removing the fresh air inlet duct, remove the cowl panel grille.







5. To remove individual components, only carry out the listed steps.

Illustration 1 Of 3, Part 1:

Illustration 1 Of 3, Part 2:

6. Illustration 1 of 3. Remove the components in the order indicated in the illustration and table.

Illustration 2 Of 3, Part 1:

Illustration 2 Of 3, Part 2:

7. Illustration 2 of 3. Remove the components in the order indicated in the illustration and table.

Illustration 3 Of 3:

8. Illustration 3 of 3. Remove the components in the order indicated in the illustration and table.

Item 7: Instrument Panel Removal Note
1. Remove the instrument panel. For additional information, refer to: Dashboard/Instrument Panel. Service and Repair

Item 8-9: LH and RH Instrument Panel Register Removal Note
1. Remove the instrument panel register.

Item 10: Plenum Chamber Removal Note
1. Remove the plenum chamber.

Item 27: Floor Console Removal Note
1. Remove the floor console.

Item 30: Transmission Selector Assembly Removal Note
1. Remove the transmission selector assembly.

INSTALLATION
1. To install, reverse the removal procedure.