Dashboard / Instrument Panel: Service and Repair
INSTRUMENT PANELREMOVAL
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
1. Remove the front floor console.
2. Remove the transmission range selector lever.
3. Remove the LH and RH A-pillar lower trim panels.
4. Remove the LH and RH windshield side garnish mouldings.
5. To remove individual components only, carry out the listed steps.
View 1 Of 3, Part 1:
View 1 Of 3, Part 2:
6. View 1 of 3. Remove the components in the order indicated in the illustration and table.
View 2 Of 3, Part 1:
View 2 Of 3, Part 2:
7. View 2 of 3. Remove the components in the order indicated in the illustration and table.
View 3 Of 3, Part 1:
View 3 Of 3, Part 2:
8. View 3 of 3. Remove the components in the order indicated in the illustration and table.
Item 1: Instrument Panel Trim Panel Removal Note
1. If equipped, remove the instrument panel trim panel nut.
Item 3: Assist Arm Removal Note
1. Lift up on the arms when lowering the glove compartment door.
Item 6: Glove Compartment Bin Removal Note
1. Disconnect the electrical connector.
Item 27: Defroster Grille Removal Note
1. Disconnect the electrical connector.
Item 38: Instrument Panel Removal Note
1. An assistant is required to carry out this procedure.
INSTALLATION
1. To install, reverse the removal procedure.