Test E

PINPOINT TEST E: THE MEMORY MIRROR IS INOPERATIVE - MEMORY SET SWITCH LED

Test E1-E3:

Test E4-E6:

Test E7-E8:

Normal Operation
The driver door module (DDM) sends vehicle power (VPWR) to the memory set switch LED on circuit 7S-AH27 (YE) whenever the SET or memory buttons 1 or 2 are pressed. The memory set switch LED is grounded at all times by circuit 31-AH27 (BK). When the DDM sends VPWR to the memory set switch LED, it will illuminate.

Possible Causes
- circuits 7S-AH27 (YE) open, shorted to ground or power
- memory set switch
- DDM