Electronic Brake Control Module: Service and Repair
Anti-Lock Brake System (ABS) Module1. Disconnect the battery ground cable.
Part 1 Of 3:
Part 2 Of 3:
Part 3 Of 3:
2. Remove the components in the order indicated in the table.
3. To install, reverse the removal procedure.
Item 3: Anti-Lock Brake System (ABS) Module Removal Note
1. Position the battery junction box (BJB) aside.
1. Release the clips.
2. Position the BJB aside.
Item 3: Anti-Lock Brake System (ABS) Module Installation Note
1. Use the diagnostic tool to reconfigure the ABS module.