Test M

PINPOINT TEST M: LFC 51/DTC B2434 - DRIVER SAFETY BELT BUCKLE SWITCH CIRCUIT SHORT TO GROUND

Test M1:

Test M2:

Test M2-M5:

Test M5-M7:

Normal Operation
The restraints control module (RCM) checks the driver safety belt buckle switch circuits for faults. If the RCM detects a short to ground fault, it will store diagnostic trouble code (DTC) B2434 in memory and flash lamp fault code (LFC) 51 (or higher priority code if one exists) on the air bag indicator.

Possible Causes
A driver safety belt buckle switch open circuit fault can be caused by:
- wiring, terminals, or connectors.
- a faulty driver safety belt buckle switch.
- a faulted RCM.