Speaker Walk-Around Test

SPEAKER WALK-AROUND TEST

NOTE: To enter the speaker walk-around test or the audio unit self-diagnostic mode, the audio unit must be ON and in radio tuner mode (AM/FM).

1. To enter the speaker walk-around test, simultaneously press and hold the audio unit preset buttons 3 and 6 (CDX6 or DM100i) or MAP and DEST (Navigation).
2. The speaker walk-around test interrupts sound from all speakers except for the one displayed on the audio unit. The audio unit allows sound to each speaker for about 1-2 seconds. Each speaker is tested and displayed on the audio unit in the following sequence: RF, LF, LR, RR, Subwoofer I, Subwoofer II. The center imaging speakers are tested last and the display is blank for about 1-2 seconds. These 2 are tested simultaneously.
3. The speaker walk-around test automatically continues and tests for a speaker short. If a speaker short exists, SPKR SHORT is displayed.