Front Door Panel: Service and Repair

FRONT DOOR TRIM PANEL







Removal and Installation
1. Disconnect the battery.
2. Remove the window regulator control switch panel assembly.
- Disconnect the electrical connectors.

3. Remove the interior door handle cover, and the screws.

4. NOTE: From the top of the cover on center, use a suitable tool, insert 2-3 mm and rotate to disengage the snap feature.

Remove the door trim panel handle cover, and the 2 door trim panel screws.

5. Remove the 4 screws and the front door trim panel.
6. To install, reverse the removal procedure.