Parcel Shelf

PARCEL SHELF

Torx Bit, Safety Belt Bolt:

Special Tool(s)

Removal and Installation
1. Remove the rear seat bolsters.







2. Using the special tool, remove the 2 rear safety belt anchor bolts.
- To install, tighten to 40 Nm (30 lb-ft).

3. Position the weatherstrips aside, and remove the 2 rear quarter trim panels.
4. Remove the rear center safety belt cover.







5. Remove the 3 pin-type retainers, pull down the rear seat latch covers and remove the package tray trim panel.
6. To install, reverse the removal procedure.