Test B: A Single Mirror Is Inoperative

PINPOINT TEST B: A SINGLE MIRROR IS INOPERATIVE

B1-B4:

B5-B8:

B8-B10:

B10-B11:

B11-B13:

B13-B15:

B15-B17:

B17-B19:

B19-B21:

B22-B24:

B24-B26:

B26-B28:

B28-B30:

B30-B31:

B32-B33:

Normal Operation
The exterior mirror control switch receives voltage from circuit 29-AD12 (OG/YE) and ground from circuit 31-AD12 (BK/YE). The exterior mirror control switch sends input to the driver door module (DDM) for the LH exterior mirror by switching voltage and ground to circuits 32-AD32 (WH/RD), 34-AD31 (BU/WH) and 33-AD12 (YE) and for the RH exterior mirror by switching voltage and ground to circuits 32-AD30 (WH/BK), 34-AD29 (BU/OG) and 33-AD12 (YE). The DDM then sends the appropriate voltage and ground for the LH exterior mirror motor up/down circuits 34-AD8 (BU/WH), 35-AD8 (VT) and left/right circuits 32-AD7 (WH/RD) and 33-AD7 (YE/RD). The DDM sends a message to the front electronic module (FEM) over the standard corporate protocol (SCP) communication link for the FEM to send the appropriate voltage and ground for the RH exterior mirror motor up/down circuits 34-AD11 (BU/OG), 35-AD11 (VT/WH) and left/right circuits 32-AD10 (WH/BK), 33-AD10 (YE/BK).

Possible Causes
- circuit 32-AD7 (WH/RD) open
- circuit 32-AD10 (WH/BK) open
- circuit 32-AD30 (WH/BK) open
- circuit 32-AD32 (WH/RD) open
- circuit 33-AD7 (YE/RD) open
- circuit 33-AD10 (YE/BK) open
- circuit 33-AD12 (YE) open
- circuit 34-AD8 (BU/WH) open
- circuit 34-AD11 (BU/OG) open
- circuit 34-AD29 (BU/OG) open
- circuit 34-AD31 (BU/WH) open
- circuit 35-AD8 (VT) open
- 35-AD11 (VT/WH) open
- exterior mirror control switch
- exterior mirror motor
- DDM
- FEM