Test E: The Roof Opening Panel Is Inoperative

PINPOINT TEST E: THE ROOF OPENING PANEL IS INOPERATIVE

E1-E4:

E4-E6:

E7-E8:

Normal Operation
The roof opening panel motor is energized by voltage on circuit 30-AG12 (RD/GN). The roof opening panel motor is grounded through circuit 31-AG12 (BK/GN). When the roof opening panel control switch is pressed it connects circuit 32-AG12 (WH/GN) to circuit 9-AG7 (BR/RD) for tilt up. When the roof opening panel control switch is slid to the open position and released it connects circuit 32-AG10 (WH/BU) to circuit 9-AG7 (BN/RD) for open. When the roof opening panel control switch is slid to the close position and released it connects circuit 33-AG10 (YE/BU) to circuit 9-AG7 (BN/RD) for close.

Possible Causes
- circuit 9-AG7 (BN/RD) short to ground or open
- circuit 30-AG12 (RD/GN) open
- circuit 31-AG12 (BK/GN) open
- circuit 10-AJ43B (GY/VT) open
- roof opening panel lifter assemblies
- roof opening panel adjustment
- roof opening panel motor
- roof opening panel control switch
- rear battery junction box (BJB) fuse 16 (20A) open