Steps 61-78

61. Carefully lower the entire assembly from the vehicle.





62. Remove the lower radiator hose bracket nut.





63. Disconnect the lower radiator, upper radiator and heater hose.





64. Disconnect the 2 oil cooler hoses, if equipped.





65. Rotate the tensioner and remove the accessory drive belt.





66. Disconnect the A/C compressor and Power Steering Pressure (PSP) switch electrical connectors.





67. Remove the 4 bolts and position the A/C compressor aside.





68. Remove the power steering tube bracket nut.





69. Remove the 4 bolts and position aside the power steering pump and reservoir.





70. Remove the transmission cooler tube bracket nut.





71. Disconnect the transmission cooler tubes.





72. Install the special tool.





73. Install the special tool.
74. Using an engine crane, support the engine and transmission.





75. NOTE: LH shown, RH similar.

Remove the LH and the RH upper engine mount nuts.





76. Using the special tool and an engine crane, move the engine and transmission from the crossmember and cooling system assembly to rest on the floor or on a bench.





77. Remove the nuts and position the wiring harness aside.





78. Remove the bolts and separate the engine from the transmission.