Steering Column Cover

STEERING COLUMN COVER

Removal and Installation
1. Remove the 2 screws and position the hood release handle aside.
2. Remove the 3 pin-type retainers and the instrument panel steering column reinforcement cover.
3. If necessary, remove upper LH instrument panel steering column reinforcement screw.
- To install, tighten to 3 Nm (27 lb-in).

4. If necessary, remove the 3 screws and the instrument panel steering column reinforcement.
- To install, tighten to 9 Nm (80 lb-in).

5. To install, reverse the removal procedure.