Selector Lever Cable Adjustment
Selector Lever Cable AdjustmentShift Cable
1. Place the selector lever in the D5 position.
2. Position the vehicle on a hoist.
3. Disconnect the transmission shift cable from the manual control lever.
4. Place the manual control lever in the D5 position. This is 3 positions from the most rearward position.
5. Disconnect the transmission shift cable from the selector lever.
6. Connect the transmission shift cable to the manual control lever.
7. Unlock the adjuster at the end of the cable.
8. Connect the shift cable to the shifter and lock the end of the adjuster.
9. Carefully move the manual control lever from detent-to-detent and compare with transmission settings. Verify that the vehicle will start in PARK or NEUTRAL, and the backup lamps illuminate in REVERSE. If not, steps may need to be repeated and include digital transmission range (TR) sensor adjustment in NEUTRAL.