Frame: Description and Operation

FRAME AND BODY MOUNTING

The frame is bolted to the body and is used to:
- aid in structural support.
- provide mounting surfaces for the rear of the front suspension control arms.
- support the radiator.
- provide a mounting point for the front stabilizer bar.
- provide a mounting point for the No.2 and No.3 crossmembers.

The front No.2 crossmember is bolted to the frame and is used to:
- aid in structural support.
- provide mounting surfaces for the front suspension control arms.
- provide a mounting point for the engine isolators.

The No.3 crossmember is bolted to the frame and is used to:
- aid in structural support.
- provide mounting surfaces for the rear transmission support insulator.

For the removal and installation of the No. 3 crossmember refer to Transmission Control Systems.