Rear Seat Backrest

REAR SEAT BACKREST

Removal and Installation

All vehicles







1. Apply pressure to the lower front portion of the rear seat cushion assembly. Push the rear seat cushion rearward to disengage the rear seat cushion front retainers. Position the rear seat cushion forward.

Vehicles with rear heated seats







2. Label and disconnect the electrical connector.

All vehicles







3. Remove the two nuts and the rear seat backrest.

4. WARNING: The retaining wires in the rear seat cushion pad and frame and the rear seat backrest pad and frame back must be fully seated in the retainer brackets to prevent the seat backrest and seat cushion from sliding forward in the event of a collision. Failure to follow these instructions can result in personal injury.

To install, reverse the removal procedure.

5. Check the active restraint system for correct operation.