Parcel Shelf

PARCEL SHELF

Special Tool(s):

Special Tool(s)

Removal and Installation
1. Remove the rear seat bolsters.







2. Using the special tool, remove the RH and LH rear safety belt anchor bolts.
- To install, tighten to 40 Nm (30 lb-ft).

3. Position the weatherstrips aside, and remove the 2 rear quarter trim panels.
4. Remove the rear center safety belt cover.







5. Remove the 3 pin-type retainers, pull down the rear seat latch covers and remove the parcel shelf trim panel.
6. To install, reverse the removal procedure.