Roof Opening Panel Glass

ROOF OPENING PANEL GLASS

Removal
1. Operate the roof opening glass assembly to the closed position.
- Position the LH and RH sight shields forward.

2. Remove the 4 roof opening panel glass screws.
3. From the exterior of the vehicle, lift the roof opening glass from the vehicle.
4. Remove the roof opening glass seal.

Installation







1. Install the roof opening glass seal.
- Position the roof opening glass seal seam in the center of the passenger side of the roof opening glass.

2. NOTE: Make sure to carefully align the sight shield to the retainer prior to positioning into place.

Install the roof opening panel glass and the 4 screws.
- Tighten to 4 Nm (35 lb-in).
- Position the LH and RH sight shields into place.

3. Align the roof opening glass.